Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

If you have troubles during the installation, your workshop shall contact our support via phone.

Contact to our technical support

GPS Installation Smartphone-App

There is a new smartphone app for workshop and customers that want to install and test GPS tracking devices.

Download the app in App-Stores

You can click on the download links below:

Apple charges 5 Euro for the download. You can only download the GPS Fleet Software App and change the application URL in the app to get to the installation app:


Features of the GPS Installation App:

Login with username and password. You can request your username and password from our technical support (Contact to our technical support)



Login / LogoutEnter and leave the app
Fahrzeuge / VehiclesTo search for test data
Einbau-AnleitungGerman installation manuls
Installation-ManualEnglish installation manuals
Call ÖsterreichCall our technical support
Call DeutschlandCall our technical support

Check the GPS Installation App test data

Für das Gerät müssen Daten vorhanden sein:

  1. The time mustbe correct
  2. DI1 must be checked, if you activate the ignition and unchecked, if you swith off the ignition
  3. Address and position must be correct
  4. e.g. DI2 must show the state of other connected senosts
  5. the field ibutton input must contain the of the driver


IMEIEnter the full IMEI

Click on the data lines and you can see the device details. You can enter installation comments and confirm with "Save installation" so that your test is confirmed.

Checklist for fixed Installations

Mandatory (absolutely necessary):

  • Before beginning the installation of your product, qualified personnel (skilled in electronic/electrical installation) must read completely this guideline (absolutely necessary)
  • Check the correct position of the GPS Antenne (absolutely necessary)

  • Check, if the device has permanent power (absolutely necessary)

  • Check, that ground is connected correkly (absolutely necessary)

  • Check that the ignition is connected correctly (absolutely necessary)
  • Do a short testtrip and check if the trip data is sent to the test software(absolutely necessary)

Depending on the customers configuration::

  • private switch is connected and tested

  • driver identification is connected and tested
  • the buzzer - driver identification is working according the customers configuration


After finishing your installation and tests you should send a Installation document to your customer/partner.

We recommend to fill in the vehicle service for every installation. It is an approval document that the installation was tested. You can download it here:


  • No labels