Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Asset-Configuration Reiter Service 


Functions and fields

Description

Current KM

Current Odometer: Value is changeable in the logbook module (only with Admin, changes will be documented)

Service after driven KM

If this option is activated, the next service will be counted by driven KM

KM after last service

Enter the last service for the report

Next service at KM

Enter the next service for the report and the alarm


Service based on date

If this option is activated, the next service will be counted by date

Last service date

Enter the last service for the report

Next Service date

Enter the next entry for the report and the

Service based on hour

If this option is activated the next service will be shown as operating hours

Operation level hours now

Enter the operation hours. The operation hours will be calculated with the ignition ON signal

Hour last service

Enter the last service for the report

Next service [h]

Enter the next service for the asset report and alarm

Text

Text field

Asset-Configuration Reiter Alarms 

 

Alarms are sent to the general recipients in the options menu and additionally to recipients that are configured for each asset.


Refer to General Alarms & Events for the detailsThe alarm recipients per vehicle are entered with telephone numbers, separately entered with +43 ... The global recipients are entered in the system settings

See Alarms and Events - General Definition

Alert Time Restrictions

Selected alarms can be limited to different time windows. There is no alarm outside the active time window. The time restriction applies to ALL vehicle alarms.

Fixed time restrictions can be

...

configured under options.

The above example explained:

Generate all alerts on every Sunday, the whole day from 00:00 to 24:00

Generate all alerts on Monday, Tuesday, Wednesday, Thursday, betwen 18:00 to 06:00 (on the next day)

Generate all alerts on Friday, Saturday between 14:00 to 06:00 on the next day

Asset-Configuration Reiter Temperature

  


The temperature alarms are only displayed if there is data for them. The iButton temperature sensors, which are connected to GPS trackers according to the installation instructions, are automatically recognized and do not require any special settings.

Functions and fields

Description

Min. Temp. Sensor

Temperatures below will trigger alert

Max. Temp. Sensor

Temperatures above will trigger alert

E-Mail or SMS

Select the type of alert

Temp Sensor Limit

Time in minutes that the temperature must exceed the limit before the alarm is triggered

 

iButton Temperature sensors that are connected to the tracking device will be automatically recognized.


Asset-Configuration Reiter Inputs and Outputs

It is very important to select the right connected inputs & outputs.

 Image Removed

For outputs. For each tracking device the right number of available inputs is shown. Please check your tracking box description and installation manuals.

Connecting accessories, sensors, switches or signal inputs to a tracking box means that the signal is connected physically to one of the boxes inputs which must be activated and tested.

 

There is an available range of standard accessories that might be connected to the tracking boxes. Please request more information from your sales contact. There is a list of System Inputs that enable different functions and reports of your software.


 Image AddedImage Addedimage2019-11-6_23-11-48.pngImage Added


Input or Sensor Name

Input Type

Description

Remarks

Ignition

Digital

Very important.

The ignition signal is a key indicator for start and stop of trips. It must be physically connected to the selected digital inputs (and the input must be activated and tested).

Ignition signal must be connected to one of the available digital inputs.

1: Active ignition (vehicle is started)

0: Inactive ignition (vehicle is stopped)

Reports and alarms that are based on the ignition signal will NOT work if the ignition is not configured or is configured at the wrong digital input!

Alarm-Button

Digital

Simple switch to indicate emergency situations. If the switch is activated, this will trigger alerts (email / SMS).

Needs additional accessories and SMS packagesSimple Button

Private/Business Switch

Digital

Switch to differentiate business from private trips in the logbook.

If a trip is highlighted as private, trip data will not be automatically shown or can be deleted upon request.

 

Geofence Button

Digital

By using a button when a new geofence is automatically created when reaching a new location.

 0: Business trip

1: Private Trip: Addresses are hidden and deleted in the logbook (see options)

 Simple toggle switch

New Customer SwitchDigitalCreates a new geofence at the current position. Simple Button
Tank Protection DeviceDigitalTriggers an alarm if there is a fuel lossAdditional feature – Tank-Protection Device required
Other Input SignalsDigitalAre evaluated or displayed as a power take-offs when the signal is activeConnection to free input
Analogue Fuel SensorAnalogue

Shows the fuel level between 0,5 and 5,5 volt analogue voltage

The configuration is entered in Reiter "Asset-Configuration > Advanced

Beware of inaccuracies

Analoge voltage conntection
Motor (based on voltage) Virtual

Most modern tracking devices transmit the current on-board voltage that comes from steady plus. When the engine is ON, the voltage is usually higher, e.g. 28000 mV and the motor input (based on voltage) can be set to ON and evaluated in a report.

Make sure that the minimum voltage drops below limit after the engine is switched off. If this is not the case, the advanced function for input 1 (ignition) OFF can also be used to set the engine or work to OFF.

Minimum voltage for motor ON must be set correctly for the vehicle

Check the correctness of the signal

If necessary, set input OFF when ignition is OFF

Work (based on voltage)Virtual

Most modern tracking devices transmit the status of a motion sensor. With movement ON the input work can be set to ON and evaluated in a report.

Make sure that the signal goes OFF after the movement has ended. If this is not the case, the input for work can also be set to OFF via the extended function at input 1 (ignition) OFF.

Motion sensor must send valid data (asset-configuration)

Check the correctness of the signal

If necessary, set input OFF when ignition is OFF

Minimum Speed

0 or 1or higher

Standard = 0 ... Logbook entries start with ignition ON (regardless of speed) and end with ignition OFF

1 or higher ... Logbook entries only start if the ignition is ON and if the speed is 1 or higher. This means there are NO stopping times with ignition ON in the logbook. Logbook entries are purely driving times (without stopping times).



RS232 Configuration for Municipal Service and special devices (e.g. RFID Reader via RS232) 

Image Added


Asset-Configuration Reiter Driver

Functions and fields

Description

Select the allowed drivers

In the upper list you can select more standard drivers with the check boxes to allow them to drive the vehicle.

Select the default driver

In the lower pull down you can select the driver that is the active driver for the next trip.

t

Select co-driver 1-3

They are useful for time attendance reasons

App visible for all

If this option is checked, the asset is visible for all smartphone app users

If this option is not checked, the asset is only visible for selected drivers.

...